Our Brake Service Process in Edmond
We keep you informed from the initial inspection through authorization. Our technicians use manufacturer-quality equipment to diagnose brake concerns, and you review the findings and estimate before deciding how to proceed.
Your brake service appointment follows these steps:
- Schedule your appointment: Contact us to arrange a time for your brake inspection or service.
- Inspect and diagnose: Our technicians examine the braking system and identify worn or malfunctioning components.
- Review the Digital Vehicle Inspection: We text you a report with photos or videos of the findings and an estimate for the recommended work.
- Authorize the work: A service advisor explains the inspection results and estimate before any brake repairs begin.
- Complete or schedule repairs: We perform approved work or schedule it based on parts availability and your availability.
1. Schedule Your Appointment
Whether scheduling online or over the phone be sure and let us know what you're experiencing so we can provide fast and accurate service advice.
2. Diagnostics and Inspections
Drop off your vehicle and the shop will get to work with inspections and diagnostics using the same equipment as the manufacturers to determine issues and next steps.
3. Digital Vehicle Inspection Report and Estimate
Following the diagnosis we will text you a digital vehicle inspection report, containing pictures and videos of our findings and recommendations.
4. Review and Approval
A service advisor will reach out to walk you through the findings and recommendations to determine how you would like to proceed, or you can approve work directly in your DVI.
5. Work Performed or Scheduled
Most work can be completed immediately, or scheduled based on parts and customer availability.
Brake Repair Estimates & Authorization
Your Digital Vehicle Inspection includes an estimate for the brake work identified during service. Before work begins, a service advisor reviews the findings with you, answers your questions, and confirms which repairs you authorize.
We also work with all major extended warranty providers. If your vehicle has extended-warranty coverage, tell us the name of your carrier when scheduling so we can discuss the next steps for coordinating the claim.
Brake Inspection You Can See for Yourself
Brake recommendations are easier to evaluate when you can see the affected components. Our Digital Vehicle Inspection (DVI) gives you that opportunity. During brake servicing, our technicians capture actual photos of your vehicle’s brake components and send them directly to you.
We explain the findings in plain language, without technical jargon, so you understand exactly what’s worn, what’s fine, and what can wait. You see the evidence. You decide what to authorize. That’s how brake repair in Edmond should work.
Why Regular Brake Inspections Matter
Routine brake checks catch problems before they compound. A worn pad caught early rarely damages the rotor. Ignored long enough, that same worn pad often means rotor replacement on top of new pads, which can cost significantly more.
How long brake pads last depends on driving habits, vehicle type, and road conditions. There’s no universal mileage figure that applies to every driver, which is why regular inspection is the only reliable way to know where your brakes actually stand.
Brake Service for Cars, Trucks & SUVs
Our ASE-certified technicians provide brake repairs for cars, trucks, and SUVs of any make and model. We service drum brakes and disc brakes, including the shoes, pads, and rotors each system relies on for consistent stopping. The inspection determines which components are worn and which continue to function properly.
Signs Your Brakes Need Attention
Brake problems often come with warning signs. Knowing what to listen and feel for can help you act before a minor issue becomes a costly one.
- Squealing or grinding when you stop: Usually signals worn brake pads that need replacement before they damage rotors.
- Soft or spongy brake pedal: May indicate low brake fluid or air in the hydraulic lines.
- Vehicle pulling to one side: Can point to uneven brake wear or a caliper issue.
- Vibration in the pedal or steering wheel: Often caused by rotor problems that affect stopping consistency.
- Illuminated brake or ABS warning light: A dashboard light shouldn’t be ignored, even if the brakes feel normal.
If any of these sound familiar, our free visual brake inspections are available on most vehicles and can often be completed during an oil change visit. Don’t wait for a small problem to become a larger repair.
Call (405) 442-9033 to schedule a brake repair appointment or a free visual brake inspection. You can also use our contact form at your convenience.
How Your Brake System Works
A complete braking system is made up of several components working together: brake pads, shoes, rotors, drums, calipers, brake lines, brake fluid, and hydraulic components. When any one part wears out or fails, stopping performance across the whole system can be affected.
Many vehicles use disc brakes on the front axle and drum brakes on the rear, though four-wheel disc setups have become increasingly common on modern vehicles. Disc brake systems use pads and rotors to create friction; drum brake systems use shoes and drums. Both designs do the same job, but they wear differently and require different inspection approaches.
Anti-lock Braking Systems (ABS) prevent wheel lockup during hard stops, helping you maintain steering control. An illuminated ABS warning light can point to wheel speed sensors, the control module, or hydraulic components. Have it checked promptly, even when the brakes themselves seem to be working normally.
Rotor Resurfacing vs. Replacement
Rotor resurfacing, also called machining, removes a thin layer of material to restore a smooth braking surface. It’s an alternative to replacement only when the finished rotor will remain above the minimum thickness specification stamped on the rotor or listed in the vehicle’s technical service data.
A rotor that’s already at or below its minimum thickness specification must be replaced rather than resurfaced. New rotors aren’t refinished before installation. Measuring rotor thickness during an inspection determines whether machining is appropriate for the existing component.
Your Local Christian Brothers Amenities
FAQs
-
Q. "Why is my ABS light on?"There are several reasons your vehicles anti-lock brake system light might be on. The four common reasons that typically cause this light to turn on include a malfunctioning ABS module, low levels in the fluid reservoir, broken wheel speed sensors, or the system is turned off. Learn more here.
-
Q. "How long will my brake pads last?"There is no perfect answer to this. Brake pads can last up to 70,000 miles while others will need to be replaced as early as 25,000 miles. The type of vehicle you drive, how you use your vehicle and your driving style are all factors to consider. If you are interested in learning more about brake pad wear and how to extend its lifespan click here.
-
Q. "When do I need to change my brake fluid?"Along with the type of brake fluid, your car’s owner manual will indicate how often you need your brake fluid flushed and replaced. In general, brake fluids flushes are recommended every 30,000 miles or two years. Click here to learn more.
-
Q. "Do you offer a warranty?"As part of our Nice difference.® commitment to providing our customers the best auto service experience possible, we also offer a3-year/36,000-mile warranty on all the work that we do. We offer this warranty at every Christian Brothers Automotive nationwide, and it will be honored at any location, regardless of which branch did the initial work.
-
Q. "What is a Digital Vehicle Inspection?"With a complimentary Digital Vehicle Inspection (DVI) on every visit, you’ll see firsthand photos of your vehicle from under the hood. We’ll let you know if everything is functioning properly or if there are any areas of concern. You can even approve or deny our service recommendations, all straight from your smartphone, or you can, of course, give us a call and we’ll explain our findings in further detail.
-
Q. "Can you provide service under my extended warranty?"Yes. At Christian Brothers Automotive, we work with all major extended warranty providers to make needed repairs for our customers. If you have an extended warranty, you can discuss your carrier with our team when scheduling an appointment and confirm that the work will be covered. You can find a partial list of the extended warranty companies we work with here.
Have more Questions?
Our friendly auto service experts have the answers.
Call your local Christian Brothers Automotive car shop today
Hear What Our Customers Had to Say About Us
-
"Thank you for a quick response for the needed repairs on our 2005 Taurus. Unfortunately, the car was beyond reasonable repairs so we thank you for letting us park the car on your lot while we decided how to dispose of the car."
- AMS